MCU-02 actuator 2 channels KNX

Actuator for 2 motors with 2 or 3 end switches, automatic measuring of the running time, binary input for 2 conventional push-buttons or to use as 4 binary inputs, feedback signal for position and status feedback, product library provided, automatic lock-out, control push-button, logic functions integrated.
Product data base ETS3 Professional or later is required.

Technical data:
– Wall-mounted housing 205 x 70 x 50 mm
РPower  230V/ 50Hz
– KNX-bus 29V
– Motor 2 x 230V AC/ 2,5A 2 and 3 end switches

MCU-04X motor control unit 4 channels KNX

Blind actuator 4 fold, for drives with 2 end switches, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons. Product data base ETS4 Professional or later is required.

Technical data
– N-System DIN-rail mounted device 4SU
– Power 230V/ 50Hz
– KNX-bus 29V
– Motor 4x230V AC/ 2,5A 2 end switches

MCU-04E Extension module 4 channels

Blind actuator extension 4 fold, for drives with 2 end switches, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons, integrated logic functions.

Technical data
– N-System DIN-rail mounted device 4SU
– Power 230V/50Hz
– Motor 4x230V AC/2,5A 2 end switches

Use in combination with MCU-04X only!

MCU-04X DC motor control unit 4 channels KNX

Blind actuator 4 fold, for drives 24V DC, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons. Product data base ETS4 Professional or later is required.

Technical data
– N-System DIN-rail mounted device 4SU
– Power 24V DC
– KNX-bus 29V DC
– Motor 4x24V DC/ 1,5A

MCU-04E DC extension module 4 channels

Blind actuator extension 4 fold, for drives 24V DC, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons.

Technical data
– N-System DIN-rail mounted device 4SU
– Power 24V DC
– Motor 4x24V DC/ 1,5A

Use in combination with MCU-04X DC only!

MCU-06 Actuator 6 channels KNX

Actuator for 6 motors with 2 or 3 end switches, automatic measuring of the running time, binary input for 6 conventional push-buttons or to use as 12 binary inputs, feedback signal for position and status feedback, product library provided, automatic lock-out, control push-button, logic functions integrated.
Product data base ETS3 Professional or later is required.

Technical data
– DIN rail housing 9SU
– Power 230V/ 50Hz
– KNX-bus 29V
– Motor 6 x 230V AC/ 2,5A 2 and 3 end switches

MCU-09 Actuator 9 channels KNX

Actuator for 9 motors with 2 end switches, automatic measuring of the running time, binary input for 9 conventional push-buttons or to use as 18 binary inputs, feedback signal for position and status, product library provided, automatic lock-out, control push-button.
Product data base ETS3 Professional or later is required.

Technical data
– DIN rail housing 9SU
– Power 230V/ 50Hz
– KNX-bus 29V
– Motor 9 x 230V AC/ 2,5A 2 end switches

GC-02 Group Control for 2 motors

Control relay for controlling blinds and roller shutter motors with mechanical or electronic limit switches. For parallel operation of up to 2 blind or roller shutter motors without unallowed parallel switching of the drives. When more than 2 motors are controlled, it is possible to connect several group controllers in parallel.
Central control input for simultaneous driving of all connected motors. Blind switches or push buttons, timers, KNX blind actuators and various control devices with potential-free contacts can be used.

Technical data
N-System DIN-rail mounted device 4 SU
– Power supply 230V/ 50Hz
– Control voltage 230V/ 50Hz
– Switch contacts 2A (AC1/ cos phi 0.6)

GC-04 Group Control for 4 motors

Control relay for controlling blinds and roller shutter motors with mechanical or electronic limit switches. For parallel operation of up to 4 blind or roller shutter motors without unallowed parallel switching of the drives. When more than 4 motors are controlled, it is possible to connect several group controllers in parallel.
Central control input for simultaneous driving of all connected motors. Blind switches or push buttons, timers, KNX blind actuators and various control devices with potential-free contacts can be used.

Technical data
N-System DIN-rail mounted device 6,5 SU
– Power supply 230V/ 50Hz
– Control voltage 230V/ 50Hz
– Switch contacts 2A (AC1/ cos phi 0.6)

COR-02-4L Isolating relay for 2 motors

The isolating relay is designed for the connection of two 230 V motors with 2 end switches. It is controlled by a central 4-pole connection. The unit does not need a separate feeder. Combinations with automatik control units like clock timer, sun and wind automatic with 230 V output are possible.

Technical data
– AP-housing 75 x 75 x 37 mm
– Protection class IP44
– Grid 230V/50Hz
– Motor 2 x 230 V AC/ 4A 2