GC-04 Group Control for 4 motors

Control relay for controlling blinds and roller shutter motors with mechanical or electronic limit switches. For parallel operation of up to 4 blind or roller shutter motors without unallowed parallel switching of the drives. When more than 4 motors are controlled, it is possible to connect several group controllers in parallel.
Central control input for simultaneous driving of all connected motors. Blind switches or push buttons, timers, KNX blind actuators and various control devices with potential-free contacts can be used.

Technical data
N-System DIN-rail mounted device 6,5 SU
– Power supply 230V/ 50Hz
– Control voltage 230V/ 50Hz
– Switch contacts 2A (AC1/ cos phi 0.6)

COR-02-4L Isolating relay for 2 motors

The isolating relay is designed for the connection of two 230 V motors with 2 end switches. It is controlled by a central 4-pole connection. The unit does not need a separate feeder. Combinations with automatik control units like clock timer, sun and wind automatic with 230 V output are possible.

Technical data
– AP-housing 75 x 75 x 37 mm
– Protection class IP44
– Grid 230V/50Hz
– Motor 2 x 230 V AC/ 4A 2

COR-02-5L Isolating relay for 2 motors

The isolating relay is designed for the connection of two 230 V motors with 2 end switches. It is controlled by a central 5-pole connection. The unit needs a separate feeder. Combinations with automatik control units like clock timer, sun and wind automatic with 230 V output are possible.

Technical data
– AP-housing 75 x 75 x 37 mm
– Protection class IP44
– Grid 230V/50Hz
– Motor 2 x 230V AC/ 4A