BMS > Produkte > Actuator/motor control units > 4-fold

MCU-04X-Box motor control unit 4 channels KNX

Blind actuator 4 fold, for drives with 2 end switches, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons. Product data base ETS5 Professional or later is required.

Technical data
– surface mounted device 210 x 165 x 37 (mm)
– Power 230V/ 50Hz
– KNX-bus 29V
– Motor 4x230V AC/ 2,5A 2 end switches

July 17, 2023 By Comments Off on MCU-04X-Box motor control unit 4 channels KNX Read more...

MCU-04X motor control unit 4 channels KNX

Blind actuator 4 fold, for drives with 2 end switches, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons. Product data base ETS4 Professional or later is required.

Technical data
– N-System DIN-rail mounted device 4SU
– Power 230V/ 50Hz
– KNX-bus 29V
– Motor 4x230V AC/ 2,5A 2 end switches

August 16, 2016 By Comments Off on MCU-04X motor control unit 4 channels KNX Read more...

MCU-04X DC motor control unit 4 channels KNX

Blind actuator 4 fold, for drives 24V DC, automatic runtime measurement, binary inputs for 4 standard push buttons or 8 single inputs, feedback of motor positon and status, different shading products preconfigured, automatic lock, test push buttons. Product data base ETS4 Professional or later is required.

Technical data
– N-System DIN-rail mounted device 4SU
– Power 24V DC
– KNX-bus 29V DC
– Motor 4x24V DC/ 1,5A

August 16, 2016 By Comments Off on MCU-04X DC motor control unit 4 channels KNX Read more...

GC-04 Group Control for 4 motors

Control relay for controlling blinds and roller shutter motors with mechanical or electronic limit switches. For parallel operation of up to 4 blind or roller shutter motors without unallowed parallel switching of the drives. When more than 4 motors are controlled, it is possible to connect several group controllers in parallel.
Central control input for simultaneous driving of all connected motors. Blind switches or push buttons, timers, KNX blind actuators and various control devices with potential-free contacts can be used.

Technical data
– N-System DIN-rail mounted device 6,5 SU
– Power supply 230V/ 50Hz
– Control voltage 230V/ 50Hz
– Switch contacts 2A (AC1/ cos phi 0.6)

August 16, 2016 By Comments Off on GC-04 Group Control for 4 motors Read more...