Quadra® – solar shading control unit for 8 sectors KNX

Integrated sensors
All sensor values of the Quadra® solar shading control unit can be send to the KNX bus.

  • null

    Wind sensor (ultrasonic)

  • null

    Brightness (north, east, south, west, sky)

  • null

    Global radiation (north, east, south, west, sky)

  • null

    Precipitation

Weather station and solar shading contol unit for up to 8 sectors. The device contains the sensors and automatic programs listed below. It is completely free configurable. The data is send via EIB/KNX bus. The device provides central evaluation of brightness, different shading strategies and several automatic functions. Automatic programs, as listed below, can be freely selected for each sector. Locking functions van be selected for each of the 3 security objects. Date and time as well as position are received via the integrated M2M mobile module which also supports remote access. Product database from ETS 3.0f.


Security programs

  • 2 wind programs
  • 2 precipitation programs
  • 2 frost programs
  • 1 global radiation programm

Comfort programs

  • 4 shading programs
  • 1 temperature program
  • 1 heat program
  • 2 twilight programs
  • 2 time programs
  • 16 input programs

Further functions

  • limit values alterable via EIB/KNX
  • solar tracking
  • fault report for sensors
  • positioning possible per program

Technical data

Dimensions 150x150x155mm
Supply voltage 24V DC / 1500mA
Bus EIB / KNX

LSL – Limit switch for light

Universally applicable limit switch for the brightness-dependent control of electrically operated exterior blinds, awnings, etc. Incl. External sensor for brightness measurement in the range of 2 – 80 kLux. Setting of the switching threshold via “Lux”-control on the device. Adjustable on and off delay for a stable system with variable mesuring values.

Technical data
– N-System DIN-rail mounted device 1 SU
– Sensor approx. 53 x 63 mm
– Power supply 230V/ 50Hz
– potential free control contacts (max. 230V/ 50Hz, 10A)
– Measuring range 2 – 80 kLux

LSW – Limit Switch for Wind

Universally applicable limit switch for the wind monitoring to protect electrically operated exterior blinds, awnings, etc. Incl. outer sensor for the measuring range from wind force 2-8. The wind sensor is supplied with potential-free low voltage (PELV) through the limit switch.
LED display when the set limit value is exceeded. Adjustable on and off delay for a stable system with variable mesuring values. Setting whether the relay contact is limited in the event of an alarm (impulse) or permanently activated.

 

Technical data
– N-System DIN-rail mounted device 1 SU
– Sensor approx. 70 x 105 mm
– Power supply 230V/ 50Hz
– potential free control contacts (max. 230V/ 50Hz, 10A)
– Measuring range wind force 2 – 8